Baur Shirla Sheath Fault Locator

Cable and cable sheath fault pin-pointing, Cable and cable sheath fault pin-pointing Cable and cable sheath fault pin-pointing is based on the principle of the step voltage method. To do this a cyclical voltage is applied to the cable or cable sheath in accordance with the diagram below. The pulsed voltage can be set at values up to 10 kV. With the step voltage meter (UL or KMF1), the device can locate damage to the cable sheath with the voltage funnel created.

ESS Code: HCSH.1

• Cable and cable sheath testing up to 10kV. Resistance measurement.
•  Cable and cable sheath fault prelocation with high precision measuring bridge.
•  Definable cable sections with individual adjustable length, cross section and conductor material Cable sheath fault pin pointing. Integrated discharge unit. Step-less voltage adjustment
•  Automatic reporting function. Mains and battery operated. Menu control via one button operation Timer function for testing and switch-on delay time

• Mains supply 110 VAC … 240 VAC, 50 Hz / 60 Hz Output voltage 0 – 10 kV 
•  Output current 10 mA @ 5 kV, 5 mA @ 10 kV Resolution 1 μA Resistance measurement
•  Cable sheath fault prelocation Measuring technique 4 wire bridge according to Murray and Glaser Measuring voltage Up to 10 kV Measuring current Max. 50 mA Accuracy ± 0,1% Measuring sequence Fully automatic balancing and measuring procedure
   

Mains Lead
Instruction manual
Earth spikes x 2
Mains on/off Key
Blue Test Lead 1.25m x 2
Includes Baur KMF1 Pinpointer.

Lead time: 1 days

Delivery and Collection charges will be displayed in the basket at checkout stage and will vary depending upon your location and transport method applied.