0800 000 346

Your Cart

No products were added to your cart
Go to Cart

Baur KSG 200 Cable Identifier

The KSG 200 cable identification system is used to identify single- and multi-core cables in a cable bundle or cable loom. By using the KSG 200, the risk of accidentally cutting a live phase is significantly reduced. This way, you will avoid in the future high-level risk of endangering individuals by miscutting, unnecessary repair costs, and supply failures for connected customers.

The cable identification system consists of a transmitter and a receiver with a flexcoupler. Intelligent electronics enable the communication between both components and make an absolutely safe cable identification possible through time and phase synchronising as well as automatic gain adjustment.

The operator-friendly and intuitive operation of the KSG 200 allows for it to be used immediately without extensively training the operator. The cable identification system is supplied in a convenient and stable transport case.

ESS Code: HCAL.15

  • Automatic recording and analysis of transmitting pulses (ATP analysis): – Amplitude – Interval (time) – Pulse direction (polarity)
  • Error-free detection of the pulse direction, even et a high loop resistance of up to 400 Ohm
  • High pulse current up to 180 A
  • Fully automatic gain adjustment
  • Expert mode for manual gain settings for clear cable identification on compact substations or mixed cable routes
  • Signal uncoupling by means of a flexcoupler for large cable diameters of up to 250 mm
  • Coupling of the transmitting pulse is effected in a galvanic or inductive manner by means of optionally available clip on current transformers
  • Current measurement up to 199 A
  • Essential for active occupational health and safety
  • Reliable and robust protection technology
  • Ergonomically designed receiver with integrated LCD display
  • No batteries required for the receiver
  • Transmitter with integrated rechargeable battery and possibility of external power supply (12 V port) optionally available
  • Pulse voltage: 300 V
  • Pulse current: Max. 180 A
  • Pulse sequence: 15 pulses/min
  • Mains voltage: 115/230/240 V, 50/60 Hz
  • Protection class: II
  • Degree of protection: IP40
  • Load current range: 0 – 199 A ± 2%, 50/60 Hz
  • Battery life: Approx. 1.5 h
  • Display: LCD display
  • Power supply: Automatic recharging in the holder of the transmitter
  • Degree of protection: IP52
  • Dimensions (W x H x D): Approx. 100 x 25 x 211 mm
  • Weight: with flexcoupler Ø 150 mm Approx. 360 g
  • Ambient temperature (operation): -10°C to +55°C
  • Storage temperature: -20°C to +50°C
  • Case dimensions (W x H x D): Approx. 594 x 174 x 435 mm
Technical Document

Baur KSG 200 Datasheet

Baur KSG 200 Datasheet

Lead time: 1 days

Delivery and Collection charges will be displayed in the basket at checkout stage and will vary depending upon your location and transport method applied.

Set up an Account

Login or create an account to gain access to your account history and document library. Link your Web Account to your ESS Credit account to hire online, contact us for details.

Baur KSG 200 Cable Identifier

hire Price

ESS Code: HCAL.15
£221.00 Weekly

Rates exclude VAT and Damage Waiver

£221.00 Ex. VAT

1

Minimum hire period: 5 days

Lead time: 1 day

Please note you will be charged for the minimum hire period if your order is for a period less than this. A web account linked to your ESS Credit account is required to hire online.

Frequently Hired Together

Baur KSG 200 Cable Identifier
Megger MFM10 Earth Sheath Fault Tester
Baur Shirla Sheath Fault Locator

Baur KSG 200 Cable Identifier

HCAL.15
1
£221.00 Weekly
Hire Now

Megger MFM10 Earth Sheath Fault Tester

1
£594.00 Weekly
Hire Now

Baur Shirla Sheath Fault Locator

1
£623.00 Weekly
Hire Now

Total Combined Hire Price

£1,438.00 per week

Rates exclude VAT and Damage Waiver

£1,438.00 Ex. VAT

Minimum hire period: 5 days

Please note you will be charged for the minimum hire period if your order is for a period less than this.

Key Product Features

  • Automatic recording and analysis of transmitting pulses (ATP analysis

  • Amplitude – Interval (time) – Pulse direction (polarity)

  • Error-free detection of the pulse direction, even at a high loop resistance of up to 400 Ohm

  • High pulse current up to 180 A Fully automatic gain adjustment

Open your ESS Account Today

An ESS Credit Account linked to your Web Account is required to hire products online.

Trading with ESS is quick and simple with an ESS account. An ESS Web Account allows you to hire online, access to the MyAccount area and our Technical Document library. Link this to an ESS Credit Account to Hire online and get reporting on your hires in the MyAccount area too.

Already have an ESS Credit Account?  You can request we link your web and credit accounts here.

Contact us for further details.

Open your *ESS Account* Today