T&R 750ADM Primary Current Injection System

Overview

The 750ADM-H mk2 is a compact, rugged primary current injection system with a 750A output capability. The 750ADM-H mk2 has a maximum no load output voltage of 5V. The unit is ideally suited to all low power primary injection tasks requiring up to 750A for short periods.

Where higher currents and powers are required for primary injection, 11kVA and 20kVA primary injection systems are available. The PCU1-SP and PCU2 mk5 systems have separate control and loading units, allowing a wide range of load conditions to be covered with different loading units.

ESS Code: HRPH.11

Primary injection up to 750A
4V output
16V 40A output for secondary injection
True RMS digital metering with single cycle capture
Multi-function timing system
Large back-lit liquid crystal display
Thermal and over-current protection
Automatic switch-off at end of test
Compact and portable

115V/230V – 750A Output
Open circuit voltage: 3.5V, 5.0V
Voltage at 500A: 2.8V, 4V
Continuous current: 125A
5 min on: 250A
1 min on: 440A, 500A
Max current: 500A, 750A
Max current on time: 10s, 20s
115V/230V – 40A Output
Open circuit voltage: 10V, 16V
Full load voltage: 7.5V, 10V
Continuous current: 10A, 10A
1 min on: 40A

Technical Document

T&R 750ADM Datasheet

Download

T & R 750ADM-H Primary Current Injection Test Set
Operating Manual
Mains Lead
Spare Fuse Set
Carrying Strap

Lead time: 1 days

Delivery and Collection charges will be displayed in the basket at checkout stage and will vary depending upon your location and transport method applied.

Set up an Account

Login or create an account to gain access to your account history and document library. Link your Web Account to your ESS Credit account to hire online, contact us for details.