Megger Ingvar Primary Current Injection Test System

The system consists of a control unit and a current unit. The two parts are portable and INGVAR can be quickly assembled and connected.
The control unit has many advanced features, such as a powerful measurement section that can display turns ratio as well as time, voltage, and current. A second measurement channel can also be used to test an additional current or voltage.
 

ESS Code: HRPH.101

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing, and more
• Up to 5000 A output current
• Two units, each of about 20 kg (44 lbs), simplifies transportation
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating test result corruption
   

• Ammeters
• Measurement method; AC 50/60 Hz, DC RMS
• Inaccuracy: 1% of range ±1 digit
• Ammeter 1
• Ranges:
• Serial Low: 0 – 2.15 kA
• Serial High: 0 – 3.30 kA
• Parallel Low: 0 – 4.00 kA
• Parallel High: 0 – 6.50 kA
• Resolution:
• 0-999 A: 1 A
• 1.00 – 6.50 kA: 10 A
• Ammeter 2
• Ranges: 0 – 2 A / 0 – 20 A
• Voltmeter
• Measurement method: AC 50/60 Hz, DC RMS
• Ranges: 0 – 0.2 V, 0 – 2 V, 0 – 20 V, 0 – 200 V, AUTO
• Inaccuracy: 1% of range ±1 digit
   

Lead time: 1 days

Delivery and Collection charges will be displayed in the basket at checkout stage and will vary depending upon your location and transport method applied.