ELCOMETER 456 SUBSTRATE THICKNESS TESTER

With its large easy to read display the Elcometer 456 substrate thickness tester shows measurements in Metric and Imperial units. View up to 8 user selectable statistics on-screen. On-screen trend graph displaying last 20 measurement values, with a scan mode facility and an auto repeat mode. When the Scan Mode is selected users can slide the Ultra/Scan probe over the entire surface area. As the probe is lifted off the surface the gauge displays the average coating thickness value, the highest thickness and the lowest thickness values. Each set of three readings (average, high and low) can be displayed on the run graph and stored into the memory. During each scan the Elcometer 456 displays the live thickness reading together with an analogue bar graph which graphically indicates the thickness relative to both the nominal thickness and any user-defined limits. In Auto Repeat Mode When the Ultra/Scan Probe is slid over the coated surface and a reading is taken approximately every half a second. Each individual reading is stored into the memory. With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

ESS Code: HTHI.5

• Fast reading rate of 70+ per minute. Stores up to 150,000 readings in alpha numeric batches.
• Large buttons with positive feedback USB and Bluetooth® data output to ElcoMaster® software suite of products.
• Easy to use menus.
• High contrast colour LCD.
• High and low reading limit indicators.
• Factory calibrated for immediate use.
• Accurate measurement capability to ±1-3%. Measures accurately on smooth, rough, thin and curved surfaces.
• Display information 2.4” (6cm) QVGA colour TFT display, 320 x 240 pixels. Ergonomic styling for comfortable hand-held operation

• Battery type 2 x AA dry cell batteries, rechargeable batteries can also be used Battery life approx 24 hours of continuous use at 1 reading per second.
• Gauge dimensions (h x w x d) 141 x 73 x 37mm Scale 1 Range: 0-1500μm (0-60mils) Accuracy: ±1-3% or ±2.5μm (±0.1mil) Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils)

Lead time: 1 days

Delivery and Collection charges will be displayed in the basket at checkout stage and will vary depending upon your location and transport method applied.